(Product Filter Meta Data)
(Product Sorter Meta Data)
Close & Wide Presentations with Interactive DLP Projectors
Give interactive presentations using this ultra short throw, widescreen classroom projector
Revolutionary Interactive Pen
Easy-to-use dual-mode pen for next generation interactive communication
Extremely short focal distance
Super short throw projector with ratio of just 0.375
HDMI- compatible
HDMI input for digital connections for PC and video sources
3D-Ready
Renders images in 3D when used with field sequential format, graphic card and 3-D glasses.
DLP Projectors that Interact
The WD385U-EST classroom projector lets you interact with presentations using our ground-breaking interactive pens. Performing the functions of conventional computer mouses, the pens that come with each short throw projector also enable you to draw or write directly on the projection screen or from a distance in Air Mouse mode. Calibration is never needed and no special projection board is required.
Widescreen from a Short Distance
Project big, beautiful images from as close as 22 inches and with an extremely low throw ratio of 0.375. Using built-in optimal optical engine design and a large-diameter lens, these DLP projectors let the presenter move in front of projected images without being disturbed by projector lights. The classroom projector delivers brilliant images with 2800lm high luminosity and 3000:1 high contrast.
Easy Network Connectivity & Remote Operation
The short throw projector features Crestron® Room View compatibility, allowing you to control power/on/off, message display and confirmation of lamp service hours within a network of up to 250 projectors. With a control software-equipped control room computer connected to the LAN, Visual PA messages of up to 350 characters can be projected in real-time throughout the network.
Present slideshows or animation effects without a PC using a USB drive
Using a PTG Converter, PowerPoint files can be converted to a special format and saved on a USB storage device. The DLP projectors can then replay slideshows or animation effects when the USB device is connected. JPEG files saved on a USB device can also be projected.
Features & Specifications
|
Mitsubishi WD385U-EST Projector Printable Data Sheet » Ultra Short-Throw Projects a 60″ diagonal image from only 23″ away—all with no mirrors 3D-Ready Perfect for higher education or corporate applications, images can be rendered in stunning 3D—adding a new dimension to viewing scientific, architectural, and engineering imagery. 3D video content must be in field sequential format, a high end graphic card and special electronic shutter glasses are required. USB Display Connect the PC via a USB cable, eliminating the need for expensive VGA cables LAN Display For displaying images via a LAN, up to four computers can be connected to one projector. The projection screen can be divided into quarters, reproducing all computer screens simultaneously PC-less Presentations Eliminate the PC altogether when using a USB storage device. Supports JPEGS or PowerPoint converted PTG files Wireless Compatibility Wireless presentations are possible when used with an optional wireless dongle (not included) Closed Caption Provides on-screen visual representation of text Digital Input HDMI input for true digital connections from both PC or video sources Wall Screen Support Ability to project images on color backgrounds such as beige, light blue, light green, pink, blackboard and whiteboard. Projector automatically adjusts for color tone. |
 Display
Included Accessories
|
Size, Weight, Power
- Weight:
- 9 lbs.
- Dimensions: (W x H x D)
- 12.8" x 4.4" x 10.2"
- Power Consumption:
- 340W/3.4A
- Power Requirements:
- AC 100-240V, 50/60Hz
- Decibels:
- 28dBA (Low Mode)
33dBA (Standard Mode)
Lens & Operation
- Lens Throw Ratio:
- .375 - .375
- Zoom & Focus Adjustment:
- PC/MAC Compatibility:
- Yes
- Scanning Frequency:
- [H] 15-80 khz, [V] 50-120 Hz
[Dot Clock] max.165 MHz - ¹Estimated Lamp Life Rating:
- 6000 hrs (Low Mode)
3000 hrs (Standard Mode) - Usage Replacement Lamp:
- VLT-XD560LP
Interface
- NTSC, PAL, SECAM:
NTSC/NTSC 4.43/PAL (including PAL-M, N) / SECAM/PAL-60, Component Video; 480i/p (525i/p), 576i/p (625i/p), 720p (750p), 1080i/p (1125i/p 60Hz), 1080i/p (1125i/p 50Hz)
- Computer & Video Input Support:
RGB: Mini D-sub 15pin x2
Video: RCA x1, S-VIDEO x1
Audio: Stereo mini jack (ø3.5mm) x1
Digital: HDMI x 1- RS-232 Communication Support: Yes
- 12V Trigger: N/A
- Computer Monitor Loop-Out: Yes
- Audio Speaker: Yes
- Audio Out: Yes
- USB Mouse Support: N/A
Support
Resources
Documentation
- EST Series Brochure »
- Mitsubishi WD385U-EST Projector Data Sheet »
- Mitsubishi WD385U-EST Projector Printable Data Sheet »
- Mitsubishi WD385U-EST User Manual »
- Mitsubishi WD385U-EST Line Drawing »
- Mitsubishi WD385U-EST LAN Control Utility »
- Interactive Pen Scaling Fix Driver for Macintosh »
- Lens Cleaning Guide »
CAD Files
Control Codes
Projector Images
Mitsubishi Online Throw Distance Calculator
General Warranty & Service Information:
Non-home theater projectors: Warranty & Service: 3-Years Limited Parts and Labor Warranty, plus 3-years or 10,000 hours (whichever comes first) DMD parts warranty; Express Replacement Assistance (ERA) during the warranty period, and 1-year or 500 hours (whichever comes first) lamp warranty. Please see the limited warranty statement for details related to specific projector details.
Home theater projectors: Warranty & Service: 2-Years Limited Parts and Labor Warranty, and 1-year or 500 hours (whichever comes first) lamp warranty. Please see the limited warranty statement for details related to specific projector details.
Exception: XL2550U/XL1550U with a 90-day or 300 hour warranty
Lamp Compatibility Information:
Mitsubishi DLP® and LCD projectors have been manufactured to strict specifications and are designed for use with genuine Mitsubishi replacement parts for optimal performance. The lamps used in Mitsubishi DLP® and LCD projectors are critical parts. The factory-provided lamps were specifically designed to meet certain performance, quality, and design specifications. Non-Mitsubishi lamps may not meet those same standards, may not be compatible with your projector model, and/or may not be as reliable and durable as Mitsubishi lamps, all of which may negatively impact the performance and operation of your projector.
Replacement of the factory lamp with, or any other use of, non-Mitsubishi lamps, including but not limited to counterfeit lamps, is strongly discouraged and may reduce coverage under our limited warranty and service policy. To ensure you are purchasing genuine Mitsubishi lamps, click here for a list of official vendors.
Replacement Parts & Accessories
 | MW-2100
|
 | PROJ-SWM-EXT
|
 | WLI-UC-GNM
|
 | PXE-DCM+
|
 | Wall Mount
|
 | PROJ-EST
|
 | VLT-XD560LP
|
 | DKT2-SRCC
|