Home > Projectors > XD8100U/LU
Looking for a different projector? Visit Showroom
(Product Filter Meta Data)
(Product Sorter Meta Data)
Superior performance & reliability
A quality solution for presenting in large, bright rooms or auditoriums



Dual-Lamp Projection
7000 lumens brightness rating in dual lamp, or lamp relay mode for continuous operation
Edge Blending
Built-in edge blending technology produces seamless images when using multiple units
Geometric Correction
Adjustable to correct distortions when projecting onto curved surfaces
Remote Management
Plug-and-play instant remote management with Crestron® RoomView® & AMX Device Discovery
![]()
We’ve raised the bar for digital projectors with the new XD8100U XGA projector
This dual-lamp DLP® projector gives you superior performance and reliability, with brightness, super resolution and continuous-use capability. If you’re looking for a reliable, quality solution for presenting in large, bright rooms or auditoriums, the XD8100U data projector is the answer.
The XGA Projector That Accommodates Your Needs
You can rely on your new XD8100U DLP projector to be just what you need, when you need it.
- Continuous non-stop 24/7 operability with dual lamp and lamp relay modes
- Automated and reusable self-cleaning filter for a lower total cost of ownership
- Ingenious heat pipe cooling technology that delivers projection cooling, energy savings and quietness as well
- Super Resolution technology that delivers ultra-sharp detail projection
- Built-in support for Crestron RoomView and AMX Device Discovery for remote management
- Edge blending for both side-by-side as well as top-bottom projectionSupports geometric projection on curved surfaces as well as 360 degree projection
- Closed Caption supportEstimated lamp life of up to 4000hrs (low mode)
- Consumes less than 1W of power consumption for increased energy savings (low mode)
- Natural Color Matrix support independent controlled color adjustments with effecting other colors
- Side-access lamp design for easy and convenient lamp access
- Delivers a bright 7000 lumens image
- Accepts 5 optional lenses, ranging from a 0.8 rear projection fixed short throw lens all the way up to our new 9.0 UZ lens

Highest Quality Images Even in Bright Halls or Auditoriums
Present with confidence even in the largest rooms with the XD8100U XGA projector. Images are reproduced in high contrast and superior brightness and with its dual lamp design it will allow for continuous projection for long periods of time. This DLP projector offers truer, more vibrant color with Texas Instruments BrilliantColorTM technology.
Designed for Easy Usability & Maintenance
Depending on a particular presentation’s needs, you can change out the high-brightness color wheel on your data projector with an optional six-segment color wheel that emphasizes richness and depth of color. The filter is self-cleaning and reusable. Each of the dual lamps needs only one hour of shut-down every week, so you can meet even the most challenging projection needs, including continuous operation over long periods of time.

Automated & Reusable Self-Cleaning Filter
The XD8100U is equipped with an automated and reusable self-cleaning filter. This combination of a mesh filter and cleaning brush helps protect and prevent dust and dirt particles from entering and affecting the internal components of the projector. Additionally this automated self-cleaning filter design not only helps reduce maintenance efforts but its reusable design makes it very eco-friendly and lowers the overall total cost of ownership.
Image Correction Using Advanced Technologies
Mitsubishi Electric’s Super Resolution technology is an advanced algorithm that analyzes the signal of the original image, identifies and estimates areas of the high-resolution data not provided—and corrects the image quality. The result is a projected image that delivers ultra-sharp details and clarity. The XD8100U also includes built-in edge blending technology for multiple side-by-side, as well stacked projection, allowing multiple projectors to create a single, seamless image. Corrective distortion allows for projection to curved surfaces, and full 360 degree projection along its vertical axis enables extensive projection ranging from floor to ceiling.
Features & Specifications
|
Printable Data Sheet for Mitsubishi XD8100U Projector »
Dual-Lamp Projection Able to produce a high brightness rating of 7000 lumens in dual lamp mode, or switched to lamp relay mode for continuous operation Edge Blending Built-in edge blending technology produces seamless images when using multiple units Geometric Correction Adjustable to correct distortions when projecting onto curved surfaces Remote Management Supports simple plug-and-play compatibility for instant remote management with Crestron RoomView and AMX Device Discovery 360° Installation Adaptable technology enables creative 360° installations from floor to ceiling—and everything in between Super Resolution Exclusive Mitsubishi algorithm takes picture sharpness to a new level—by analyzing blurred image components and correcting for ultra-sharp detail images Ultra-quiet Noise Level Operates at an ultra-quiet noise level of only 28dba (low mode) Advanced Cooling System Compact, maintenance free heat pipe for reliable and efficient cooling Swappable Color Wheel Optional 6-Segment color wheel can be interchanged for richer, truer colors Optional Lenses Able to accept a variety of lenses to meet your application needs. Automatic Self-Cleaning Filter Equipped with a self-cleaning, self-rotating, reusable air filter that reminds the user when to remove and rinse Closed Caption Support closed caption for hearing impaired needs Made in Japan This projector was designed and manufactured in Japan |
![]() Display
Included Accessories
|
Size, Weight, Power
- Weight:
- 35.3 lbs.
- Dimensions: (W x H x D)
- 19.3" x 7.9" x 16.6"
- Power Consumption:
- 860W/8.7A
- Power Requirements:
- AC 100V, 240Hz
- Decibels:
- 28dBA (Low Mode)
36dBA (Standard Mode)
Lens & Operation
- Lens Throw Ratio:
- 1.7 - 2.4
- Zoom & Focus Adjustment:
- Motorized Zoom & Focus
- PC/MAC Compatibility:
- Yes
- Scanning Frequency:
- [H] 15-100 khz, [V] 50-95 Hz
[Dot Clock] max.162 MHz - ¹Estimated Lamp Life Rating:
- 4000 hrs (Low Mode)
N/A (Standard Mode) - Usage Replacement Lamp:
- VLT-HC3800LP
Interface
- NTSC, PAL, SECAM:
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component Video: 480i/p(525i/p), 576i/p(625i/p), 720p(750p 50/60Hz), 1080i(1125i 50/60Hz), 1080p(1125p 50/60Hz)- Computer & Video Input Support:
PC: 5 BNC x 1, Mini D-Sub 15pin x 1, DVI-D(with HDCP) x 1
Video: BNC x 1, S-VIDEO (4pin) x 1, HDMI x 1- RS-232 Communication Support: Yes
- 12V Trigger: N/A
- Computer Monitor Loop-Out: N/A
- Audio Speaker: N/A
- Audio Out: N/A
- USB Mouse Support: N/A
Support
Resources
Documentation
CAD Files
Control Codes
Projector Images
Mitsubishi Online Throw Distance Calculator
General Warranty & Service Information:
Non-home theater projectors: Warranty & Service: 3-Years Limited Parts and Labor Warranty, plus 3-years or 10,000 hours (whichever comes first) DMD parts warranty; Express Replacement Assistance (ERA) during the warranty period, and 1-year or 500 hours (whichever comes first) lamp warranty. Please see the limited warranty statement for details related to specific projector details.
Home theater projectors: Warranty & Service: 2-Years Limited Parts and Labor Warranty, and 1-year or 500 hours (whichever comes first) lamp warranty. Please see the limited warranty statement for details related to specific projector details.
Exception: XL2550U/XL1550U with a 90-day or 300 hour warranty
Replacement Parts & Accessories
![]() | Color Wheel
|
![]() | Optional Lens
|
![]() | Optional Lens
|
![]() | Optional Lens
|
![]() | Optional Lens
|
![]() | Optional Lens
|
![]() | Miscellaneous
|
![]() | Miscellaneous
|
![]() | Hard Shell Projector Case
|
![]() | Hard Shell Projector Case
|
![]() | Replacement Lamp
|
Projector Tools
Useful utilities for your projector
Projector Support
Your source for all questions about Mitsubishi Projectors













